The electric soccer ball inflator allows you to inflate by simply turning on the switch, and is recommended for people who have many soccer balls and teams who have many balls at clubs and club activities.
The air pressure of the ball is often 0.7-1.1 ber, and in the case of clay (soil) pitch, it is common to put the air pressure in the lower range of 0.7-0.9, and in the case of lawn the pitch is higher, around 0.9-1.1. Recommended for
How to inflate a soccer ball
Insert the needle as vertically as possible into the valve. If you insert it forcefully, the needle may break, so insert it carefully without inserting it forcefully. If the needle does not enter, clean the needle and ball valves. You can also use a lubricant on the inflator needle to make it slippery and insert the needle.
Anyway, insert the needle carefully without overdoing it. If the needle breaks, be careful not to force it out. When pulling out, use a tool such as pliers to pull out the needle.
Also, since the inflator of the soccer ball can be replaced with a new needle, replace it with a new needle and insert the needle into the soccer ball. The needle for inflating a soccer ball breaks quite well, so be careful and always take precautions.
As an actual method of putting in, in the case of a hand pump, move your foot up and down and in the case of a pump, move your foot up and down to add air. If you can measure the air pressure, add air while measuring the air pressure diligently.
If you want to bleed the air because you put too much air in it, you can bleed the air by inserting only the needle of the air bleeder into the valve. Be careful when deflating the air, as the air will escape at once. Also, be careful not to break the needle when you pull it out.
How to inflate a soccer ball?
2020 06/30